Modular Screwless PiStack Raspberry Pi & ROCK 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully modular stacking system designed for both Radxa ROCK 4 and Raspberry Pi.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A fully modular stacking system designed for both Radxa ROCK 4 and Raspberry Pi. The stack features a secure, screwless design with mounting pillars that hold the boards in place. The press-fit feet are printed separately to minimize material waste and reduce the need for supports. Easy to assemble and expand, making it perfect for multi-board setups.
Make sure your printer is calibrated and the filament prints good. Otherwise you will get bad results speaking from experience with this one.
Offcourse you can combine Radxa and raspberry modules. I have 3 Radxa rock 4 SE, 2 raspberry pi.
Tested Rasbperry Pi's: 3,4 and 5 should be fine.
Tested Radxas: Rock 4 SE.
Updates
2025-02-08:
I made the mounthole pillars and the pressfit pillars stronger.
There is multiple print profiles:
- Raspberry Pi Standard
- Radxa Rock 4 SE Standard
Standard Includes: 2 stack modules, 2 sets of standard feet and a top stack with logo.
!Radxa and Raspberry pi have different mounting hole size!
If you don't want the logo just remove it easy in bambu studio.