Twisted ladder line spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Twisted ladder line spacers, 24° twist, 25mm apart
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Twisted ladder line spacers
- 25mm conductor distance
- 24° twist
- 12mm tall
- 2.5mm wire diameter (with insulation)
Printed in ASA, no infill, 3 perimeters.
2 part assembly that simply clips together. Separators have a 24° twist, so you will need 15 pieces for a full 360° rotation. Torsion of the ladder line allows for improved performance under wind load.
The conductor holes have small protrusions on each end (4th picture) that bite into the insulator for better grip.
Assembly
I suggest marking the installation distances with a paint marker and holding each spacer in a vise while you install the next one. Stiff wire is better.
I didn't get great results with my wire, so I'm also working on a jig to ease wire installation.