Hive Thermostat Mini Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for the Mini version of the Hive Thermostat. Designed for use with M3x10 screws
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like this model, and you're feeling generous, please check out my Ko-Fi page here!
EDIT: V2 has now been added! The original design was sagging over time, so I've bulked it out a bit without losing the minimalist aesthetic.
This stand is designed to be sleek and minimal, using only approximately 15g of filament.
It is best printed on its side (the file should default to this orientation), and at whatever layer height you see fit. I printed at 0.2mm and it looks great, I don't see a need to print at a higher resolution.
In order for the M3 nuts to hold the battery cover properly, I designed a captive nut part that sits in the countersunk recess. It's a tiny part that can be tricky to print well on a 0.4mm nozzle. I would recommend flipping this part over with the captive nut space on top so that it doesn't require any support.