1 / 2
Do not Clean Clear Panels with IPA Magnetic Sign
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Sticker on my Core One Said "Do not Clean Clear Panels with IPA" because I forget thing, I made a Magnetic Sign
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For this print, an MMU (Multi-Material Unit) solution is required.
Additionally, you will need three 5x10mm round magnets for the print.
Slicing Instructions:
- In your slicer, add the file “Main_Body_5x10mm_Round_Magnets.stl.”
- Add “Symbol.stl” and “Text.stl” as modifiers.
- Ensure the magnet side is facing down, You can be sure the right side is facing down, when the Text is upright.
- Assign your desired filaments to each part and slice the model.
- Set a pause mid-print to insert the magnets.
Magnet Insertion:
When prompted, insert the magnets into the designated slots before resuming the print.
If you need support for different magnet sizes, let me know—I may be able to add them.
Happy printing! :)