Antenna Wire End Insulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight wire end insulator for portable wire antennas with a tie off for an S-Biner or rope.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 597
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This no-knot-sense antenna wire end allows the end of a wire antenna to attach to a rope or S-biner for easy portable deployment and tuning.
The wire holes were tested with 26 gauge PolyStealth wire and hold solid with friction only.
I recommend pairing this model with Nite Ize S-biners or K6ARK S-biners: https://www.printables.com/model/402834-s-clip-s-biner for easy and quick deployment in the field.
Printed in PETG. I included 3 variations: Standard, fillets, and chamfers. I've found that the Standard variation prints the cleanest, but I'm still learning how to use my printer and tweak settings. Some people may prefer the fillet or chamfer version if they are using a weaker wire.