1 / 3
Spacer for laser engraving and cutting honeycomb XTool S1 and others — zdjęcie 1
1 / 3

Spacer for laser engraving and cutting honeycomb XTool S1 and others

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this simple but useful tool to help hold the wood or other material off of the honeycomb bed to prevent flashback

Ocena
0 / 5
Polubienia
12
Pobrania
84
Wydruki
0
Wyświetlenia
565
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

I made this simple but useful tool to help hold the wood or other material off of the honeycomb bed to prevent flashback, scortching and buring on the underneath of meterials. I designed it to fit the XTool S1 honeycomb but should work with most others too. The posts are mounted off center to allow you to sping the disk to position it easily.

Tagi