1 / 2
Ikea Koppla Outlet Power Strip 2 hole straps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ikea Koppla Outlet Power Strip 2 hole straps. One has a cutout and is meant for the end of the strip.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 155
- Wydruki
- 3
- Wyświetlenia
- 762
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (25)Powiązane
Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all.
I used Esun PLA+ as it was already loaded and it works well but in a perfect world I would use PETG.
Thanks and enjoy!