High Laptop Stand for 15.6" laptops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beefy laptop stand for standard 15.6" laptops, lifts it up to be closer to your external monitors!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 1044
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Intro:
Basic laptop stand with vertical space underneath the elevated laptop. Ideal for the multi-screen situation where you have that extra little space open on the desk and you hand doesn't bump into the laptop or stand.
Printing instructions:
Print the stand on its side, fits on Creality ender 3V2 bed (220x220), can print both parts in one go if you wish.
I printed mine with a 0,4mm nozzle:
- Base : 2 perimeter walls and no infill in PLA
- Support: 2 perimeter walls with 10% infill
Assembly Instructions:
Snap the support into the base (the base is flexible enough to allow this, hence the support :-) ). Note that there are angled faces, align the support so these faces are parallel on the support and the base.
