1 / 2
Li'l Magnum! Fingertip Mouse Shell for Corsair Katar Pro Wireless — zdjęcie 1
1 / 2

Li'l Magnum! Fingertip Mouse Shell for Corsair Katar Pro Wireless

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse.

Ocena
0 / 5
Polubienia
4
Pobrania
33
Wydruki
0
Wyświetlenia
482
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Be sure to check out the tips on successfully printing a good, light Li'l Magnum!

NOTE: Don't try to buy an ancient mouse like the Corsair Katar Pro Wireless!  I needed to support a different mouse to help me refactor the OpenSCAD source code for the Li'l Magnum!, and I have a few of these five year old mice on hand.  There is no good battery mounting solution.  I just soldered wires to a USB-C rechargeable AAA battery and taped that to the top of the mouse.

It might not be worth doing this mod even if you already own a Corsair Katar.  You might be able to buy a VXE R1 SE for just a bit more than the price of a pack of rechargeable batteries, and you will have a lighter, lower latency, more modern and rechargeable mouse.

This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse.

The thumb and finger rests are in a reasonable spot for me, and the buttons are lined up well. 

My Li'l Magnum! with the Katar electronics, scroll wheel, and aftermarket USB-C battery installed weighs 26.13 grams.

  • v0.1 - First STL to fit the Katar
    • It isn't as dialed in as the VXE R1 shell, but it is pretty good!
  • v2.0 - Structural, weight, and ease of print changes!
    • Buttons are slightly more solid even with reduced weight
    • Button plungers adjusted
      • Square base instead of round for cleaner supported printing
      • Angled underside of paddles to reduce need for support materialAdded parametric side braces
    • Katar lens holder works better, but it is on the tight side!