Heat insert press - detachable holders, longer arm and riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Detachable holders for pinecil v2 and for ts101 soldering iron. Longer arm. Riser base for tall objects
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I made 3 upgrades for the Heat insert press, which is great by itself and I recommend it. I really like it.
I have printed all on Prusa MK4S or XL with 0.4mm nozzle using 0.20mm layer height. As material goes, you can use anything you like, but i do not recommend PC blend because of warping, it can bend your arm and it will no longer be straight. I printed arm using PETG CF for shape stability and temperature resistance, holders from simple PETG, but after few minutes of work they become pretty warm, so in time, I may need to print new one or maybe more heat resistant material will be needed (PC blend here is totally fine). I do not recommend carbon fibre material for holders as they are abrasive and may leave scratches on your soldering iron.
Detachable holders from arm:
I have TS101 at work and Pinecil V2 at home and I need to change the holder, but changing arm takes a long time and I have destroyed some M2 screws which needed to be replaced. So I made detachable holder from arm.
The actual holders are not mine, but referenced models modified to be attachable to modified arm. Thank you authors for these models.
Use holderarm* and holder* files. After print, you may need to post process (cut a little bit) the cylinders on holders so it can be inserted to arm easily.
Put 2 M3 thread inserts into arm as you can see in one of the photos and use 2 short M3 screws (10mm or 12mm should be enough). I use these inserts: https://www.amazon.de/-/en/Threaded-Inserts-Insertion-Printing-Automotive/dp/B0D17FGQWW?th=1. You can use other inserts with similar dimensions like those from CNC kitchen. There is small reserve for longer inserts or screws.
Longer arm:
I needed to reach further so I also made a longer arm. It is 3 cm longer than the standard one. Other dimensions are the same as the original, no adjustments there.
Riser:
I also needed to reach higher so I made detachable “bridge-like thing”, you can slide press body inside. The 3mf file is Prusa Slicer project with support enforcers drawn. You only need enforcers for part of the bridge between legs, otherwise your printer should be able to do overhangs and bridges. I printed with PLA on 0.25mm SPEED and it printed nicely.
Again, thank you to all makers of original models!