Qidi X-Plus 3 Filament Spool Holder Featuring Low-Friction Bearings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side spool holder. It is easier to use and load.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This spool holder is a rewarding project that is straightforward to assemble, though it requires some time to print and put together. The cover is conveniently secured with magnets, and a handy hook holds the cover in place while loading a spool. Its funnel-style design simplifies filament loading, and integrated bearings reduce filament tension, allowing for smoother operation.
The ribbed texture on the exterior of the main body results from the “fill gap” option enabled in my slicer settings. If you prefer a smoother finish, feel free to adjust these settings. For reference, I printed the parts at a 0.2mm layer height, with 4 walls and 15% infill, except for the main support, which I printed at 100% infill to ensure added strength.
All necessary materials are listed in the included instructions file, and I have provided STEP, 3MF, and STL files to enable easy customization of the design.
Before starting, take a moment to review the requirements and list of supplies. Reading through the instructions will help you determine if this project suits your needs. With the provided STEP files, you can easily tweak the design to fit your specific setup.