Policar Analog Base Power Track for XLR Connected Controllers for your Slot Car Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Policar Analog Base Power Track for XLR Connected Controllers for your Slot Car Track
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Policar Analog Base Power Track for XLR Connected Controllers for your Slot Car Track
There's enough room for a polarity/direction switch that I'll be adding soon, but you can do your own. You'll need two XLR female panel mount jacks as well as some kind of power input. I went with a DC barrel plug panel mount jack I had lying around. Once I do the wiring, I'll try to make some kind of diagram and share it. Until then, search the internet for analog slot car track controller wiring diagram. The base plate fits Policar half straights. Find an appropriately small, short, wood/metal type screw to hold the plate to the track and the body to the plate. the only requirement is that's it's a flat head type screw.
I've uploaded STL files if you use the same hardware, but also STEP and F3D files for if you want to adjust for your hardware or just use the base plate for your own project. Please upload any such projects as a remix to this one. :)
Update: 2025/01/28 - Added version with space for border on the inside.