MLOK Mount for Streamlight ProTac (Designed for Springfield Hellion)

I bought a Springfield Hellion… VHS-2(I hate the import name). I bought things to put on it. One of those things was a Streamlight ProTac HL-X, because I'm a sucker for WML's. Problem is - you can't pic rail mount the switch, as the pic rail on the VHS-2 is half a mile away. The only other options are either buy a $40 mount(that admittedly looks nice), use the 3M tape(which has a terrible place to stick on because of the handguard's design), or get an MLOK pic rail section (which greatly increases depth and makes it bulky). I already hate the idea of tape to begin with, don't like bulk, and MLOK is kinda nice…

So I made this. It's designed around MLOK, uses Magpul hardware(which you can buy at Cabela's/Bass Pro for like $6 if you don't have any), and it's compatible with zip-ties or if you want to use the screws that came with the Streamlight, you should be able to.* I used screws and zip-ties for maximum peace-of-mind. It's designed so it can slide fully within the MLOK slot, so you can vary placement. There's no reason this wouldn't work with something besides the SA Hellion, but it would sit funny. Feel free to remix designs that are more compatible with other rifles, I don't mind.

I have taken this to the range and it seems to hold up just fine, has around 100 rounds through it, but I don't really foresee any issues. I printed in PETG on an Ender 3 Pro with 20% infill. I also printed upside down(triangles down) with normal supports, as I figured with the curves and MLOK tabs I didn't want the support to be involved with all that.

Left side version included, the rifle is fully ambi after all.

1* I did not print this version. The version I printed is the previous one, where the triangles up front were 1mm too far back, and the screw holes are 1.5mm. This version has the triangles moved forward by 1mm and the screw holes are opened up to 2mm. If this doesn't work correctly, please let me know. I will happily reprint and test more