Crysknife (Version 2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variation/remix on my first crysknife version.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
None of the Crysknife designs I've seen really grabbed my interest so I decided to design make my own - Of course, this meant ignoring the original measurements and almost doubling the length, turning it into more of a long knife than the 20cm blade mentioned in the books, But I'm quite happy with the shape and feel and it came together pretty well.
So far, I've printed this but not finished painting it.
Dimensions (rounded up to cm) are;
length: 40cm
width: 30cm
height: 40cm
I've included the model in several chunks as well as in one form for various sized print beds;
Files are as follows;
- Crysknife_v2_whole.stl - The whole model.
- Crysknife_v2_left_side.stl - The left side of the model.
- Crysknife_v2_right_side.stl - The right side of the model.
- Crysknife_v2_right_side_hilt.stl - right side hilt of the model
- Crysknife_v2_right_side_blade.stl -right side blade of the model
- Crysknife_v2_left_side_hilt.stl - left side hilt of the model.
- Crysknife_v2_left_side_blade.stl - left side blade of the model.
Users with larger print beds can print the whole thing with supports OR just the left and right side and glue together using the pins provided to align the halves.
Users with smaller print beds can print the side hilt/blade sections and glue together.
A small degree of sanding and finishing required but not that much.
Note: Version pictured here has a symbol in the blade which is not included in the print files above.
Designed in Tinkercad
Printed on Flashforge Adventurer 5M @ .04 / 25% Infill.