Handle Hole Covers for Wood Plyometric Jump Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't want items falling inside my CrossFit jump box, so I designed these covers to catch things. They stay away…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I didn't want items falling inside my CrossFit jump box, so I designed these covers to catch things. They stay away from the edges in every direction, so that you can comfortably pick up the box in any orientation. If item do fall inside, the walls of the hole covers are tapered, so just tip the hole upward and the items should move toward the center where you can grab them.
There is an included jig, that will let you align the handle inside nicely. Be sure to remove the jig after you mark the holes, and before you install the handle.
Install with short wood screws. I think I used #10 x 3/4"L. Maybe they were #12.
Prosource Fit 3-in-1 Wood Plyometric Jump Box for Crossfit, Agility, Vertical Jump Training & Plyo Workouts, Sizes 24/20/16 & 30/24/20
https://smile.amazon.com/gp/product/B071R35H7T/
Handle Hole: 5.910" x 2.170" (131.826mm x 55.118mm), wood 0.720" (18.288mm) thick, slightly over 1/2" (~15mm?) radius fillet in corners
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.20mm
Infill:
90%
Filament:
Paramount PETG Iron Red
Notes:
You should print these with high infill, out of PETG. The jump box takes abuse, and you want these hole covers to be impact resistant.
Category: Sport & Outdoors