1 / 1
Creality K1 K1C Silicone brush nozzle cleaner Bracket / Holder WITHOUT gluing — zdjęcie 1

Creality K1 K1C Silicone brush nozzle cleaner Bracket / Holder WITHOUT gluing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remix model and now it mounting without gluing Use with Bambu A1 silicone brushes

Ocena
0 / 5
Polubienia
26
Pobrania
159
Wydruki
0
Wyświetlenia
1078
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of my previous remixed model, because the nozzle pulls the brush out of the bracket

I added skirt with chamfer and now it mounting without gluing or doubleside tape

I have 2 models :

  • with offset - 1.6 mm (print it with supports) 
  • without offset (flat, without supports)

You need to buy : Bambu lab A1 silicone brushes. Requires one + cut half silicone brush

Offset need because I remove 4 original  table spacers and now I use hand screws to  leveling table with silicone springs. After that i have some  (-1.6mm) offset table. 

Print in with hight temp filaments