1 / 21
Qidi X-Plus 4 Poo Bucket and Rear Fan vent modifications 120mm 80mm 40mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra large Poop buckets for the Qidi X Plus 4 120mm, 80mm and 40mm rear fan covers
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 258
- Wydruki
- 2
- Wyświetlenia
- 1206
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 2) (Komentarze: 12)Remiksy (0)Kolekcje (68)Powiązane
Extra large poop bucket for Qidi X-Plus 4. 100mm deep 200 wide 266mm tall
It mounts easily on the rear vent cover over two large locator pins. Hangs just above the table top.
5 different types:
- 40mm fan Hex - Requires 4 - 3mm x 20mm screws
- 80mm fan Hex - Requires 4mm bolt and nuts
- 80mm fan Large slotted vents
- 120mm fan Large slotted vents and fan cover
- Bracket for the standard rear vent cover. Uses existing screws. And you may need 2 more 3mm x 8mm screws
Print Buckets with 3 wall lines. No supports necessary
Print rear covers with 2-3 wall lines.
I would recommend printing with Petg or ASA but PLA should be fine with all the new air flow to keep it cool.
