Insert/Organizer for Forgotten Waters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Game box insert/organizer for the boardgame Forgotten Waters
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 212
- Wydruki
- 4
- Wyświetlenia
- 1552
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An organizer for the game Forgotten Waters. Sized for cards with or without sleeves.
Print Instructions
Print with 0.4 or 0.6 mm nozzle, 0.3 mm layer height, 15% gyroid infill, no supports. I strongly recommend using a brim for the spacers, to avoid warping. Print x numbers of card dividers as you see fit.
Assembly Instructions
The large spacer that also doubles to hold the boards is too big to fit onto a Mk3S, so I broke it into two parts. Place the spacers first, then put the component boxes on top. The photos show where everything goes.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.