1 / 4
Caliper Holder Belt clip (for clipping onto belts and other straps) — zdjęcie 1
1 / 4

Caliper Holder Belt clip (for clipping onto belts and other straps)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A belt mounted remix of another caliper holder

Ocena
0 / 5
Polubienia
2
Pobrania
26
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Share Alike

I needed a belt clip and the other ones i found weren't doing it for me so i remixed a remix of another caliper mount. It's pretty sturdy although i wouldn't run around in it. As an added bonus it fits pretty well in my case. 

For printing: 

If you're not using the 3mf file there's some step files as well, although there's a part lodged in the side of the clip use that as a modifier for fuzzy skin which gives a lot more grip 

If the clip is stuck together and you can't pry them apart try reducing the “Fuzzy skin Thickness” These setting worked fairly well for me. 

I used a 0.4mm nozzle 
0.2mm layer height
In PETG 

Printed on a Bambu Lab P1S with Bambu lab translucent smokey grey PETG 
 

Tagi