1 / 5
Coffee knock box (Knock Jar)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter that sits on common EU jar, forming a nice industrial knock box.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple industrial-looking knock box adapter for jar (outer diameter cca 7,5 cm) - easy cleanup.
Details:
- Base printed upside down with supports (I didn't use organic)
- Printed with PETG due to heat resistance (can withstand a dishwasher)
- 0,26mm layer height
- with brim
- 5% infill base, 50-70% infill rod
- In the picture I used fuzzy skin to hide imperfections
- The rod looks nice with custom fill (up and bottom)
UPDATE:
I adjusted the rod. It now has a little bump at one end and a release pin in the other, so now it doesn't slide around. Printed with no supports.
Base: cca 5,5 hours
Rod: cca 2 hours
Fitment of the rod is kinda dependant on your printer. It's better if it is a snug fit rather than loose, which tends to slide. A bit of glue should fix it.