Globe stand with a Whadda clap on/off switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A globe stand with a clap activated switch to turn on and off the lamp.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed and printed a box to contain the Whadda switch module (you have to weld the kit by yourself, fast and quite funny if you ask me), a screwed lid on the bottom (the 4 holes under the box are for m3 inserts) and a M75 thread on top to screw the globe. The G4 socket from aliexpress fits in the middle. There's a hole on the side for the 12v power supply.
- PLA (Bambu Basic)
- 0.4mm nozzle
- 3 walls
- i printed the box upwards with tree supports so the visible parts look nice.
I choose a G4 12v 2w 3000K led lamp. The relay power rating 24VDC/AC 3A allows you to put another kind of lamp if you want. But you'll probably have to adapt the lamp socket too.
The Whadda electronic kit from amazon : https://www.amazon.fr/dp/B09YHTBBJJ?ref=ppx_yo2ov_dt_b_fed_asin_title
The G4 socket from aliexpress : https://www.aliexpress.us/item/1005006225212790.html?spm=a2g0o.order_list.order_list_main.5.49965e5bcdWYDI&gatewayAdapt=4itemAdapt
Thanks again Fritz for these amazing lamps, it looks great !