Qidi Plus 4 Advanced Filtration Cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @DarkDoctor's great AFS with modeled supports to reduce required filament and maybe improve air flow.
- Ocena
- 4,667 / 5
- Polubienia
- 39
- Pobrania
- 242
- Wydruki
- 2
- Wyświetlenia
- 1056
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After printing Dark Doctor Studios' great Advanced Filtration System model, I broke one of the front upright arms while removing the slicer-generated organic supports. The supports were harder to remove than I'd anticipated. Admittedly, I could have done a better job configuring the supports, but I was still a little annoyed that I had to use supports at all. So I set out to remix the model to:
- Eliminate the need for slicer-generated supports.
- Reduce some bulk from the model.
- Recover some of the real estate for the activated carbon lost to the inclusion of the HEPA filter.
- Add some cosmetic chamfers to satisfy my aversion to sharp edges.
I printed this using QIDI ABS-GF25, which I really like a lot.
Print the model as already oriented in the .3mf file.
0.4mm nozzle at 0.2mm layer height, 3 perimeters, 5 top solid layers, 4 bottom solid layers, 10% gyroid infill and no generated supports.
Edited (2025/03/06)
The filters I'm using are “BlueStars ILIFE V3s V3s pro V5 V5s V5s HEPA filter Replacement”, which have worked pretty well for me. They can be found here: https://www.amazon.com/dp/B0CK2QT3KW