1 / 4
Bowden / PTFE tube guide for SV07/SV07 plus gantry
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap in guide for 4mm bowden/PTFE tube for the Sovol SV07/SV07 plus.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Gantry mounted bowden/ptfe tube guide. I made/remixed this to get the spool of the top gantry and instead print directly from the SH02 filament dryer. Fits the Sovol SV07 and SV07 plus. Snaps in to the two screw holes on top of the gantry.
Depending on the tolerances on your print and tube you may need to adjust size of the hole fo the tube. I had to run a drill though with a 4mm bit to get the tube to go all the way through.