1 / 2
MrBeast Funko Pop-style  –Jimmy Donaldson - The YouTube Legende — zdjęcie 1
1 / 2

MrBeast Funko Pop-style –Jimmy Donaldson - The YouTube Legende

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

AI Generated and hours of editing to make it look exactly like the picture. Hope u enjoy my work feel free to say Hi :)

Ocena
0 / 5
Polubienia
13
Pobrania
132
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

🔥 "MrBeast 3D Print Challenge: Will Your Print Survive?" 🔥

Alright, 3D printing fans, listen up! Imagine this: MrBeast challenges you to print this model perfectly, and if you fail… well, you just lost $5,000,000 (okay, maybe just your patience). But don’t worry! Follow these steps, and you’ll be printing like a pro:

🎯 Step 1: Choose Your Printer & Filament

  • Any FDM printer will work (Ender 3, Prusa, Bambu Lab, etc.).
  • PLA, PETG, or ABS – pick your fighter! (PLA is easiest).

⚙ Step 2: Slice Like a Beast

  • Layer Height: 0.2mm (Standard Quality)
  • Infill: 15-20% (Strong but not overkill)
  • Support Type: Light Tree Supports ONLY (keep it simple, no scaffolding nightmares).
  • Brim? Only if you’re afraid of failure.

🔥 Step 3: PRINT & PRAY

  • Heat up that bad boy: 200°C nozzle, 60°C bed (for PLA).
  • First layer = make or break (like a MrBeast challenge).
  • Wait… wait… don’t touch it yet!

🏆 Step 4: Profit! (Or Rage Quit)

  • Let it cool before removing (or risk turning it into spaghetti).
  • Show off your masterpiece & flex on your friends.

💡 Bonus Tip: If it fails, just say it’s "limited edition." 😆

Now go forth and print like MrBeast just bet his entire fortune on it! 🚀💰

Tagi