Textile sleeve tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple tool that helps you to put heatbed / extuder cables into the textile sleeve
- Ocena
- 4,96 / 5
- Polubienia
- 266
- Pobrania
- 640
- Wydruki
- 23
- Wyświetlenia
- 4126
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
We all know how hard it is to put the bed cables into the textile sleeve. This tool helps you solve this exact issue. You of course need another printer to print it on, so if Prusa is your first printer, then it won't help you much but it may be handy to keep it somewhere in case you ever need to replace something.
There are two versions in the 3mf file, one is simply scaled to work for the extruder sleeve, although on MK4/S it's not that difficult anymore.
How to use: https://imgur.com/a/htNSlGQ
You can print without a brim, if you have your printer set up correctly, it won't fall off.
V3 is now out! It now has a print-in-place hinge and a handle to make it much easier to use. The hinge may not move right after taking it off the build plate, but if you hold it with your fingers near the hinge and use a little bit of force, it will break free. Enjoy :)
The model is very simple but very effective :)