1 / 4
Fold-Away Hinge for Prusa XL EnXLosure Lid — zdjęcie 1
1 / 4

Fold-Away Hinge for Prusa XL EnXLosure Lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple hinge to lock the EnXLosure's top door open in place

Ocena
4,667 / 5
Polubienia
12
Pobrania
47
Wydruki
3
Wyświetlenia
265
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Happy user of the EnXLosure for my XL. However, my basement workshop has a fairly low ceiling where the XL sits, so the top lid of the enclosure hits the ceiling and won't stay up.

This is a simple solution to keep the lid in place at a 115 degree angle: it's a hinge that grabs the side of the top door acrylic panel and props it open, but swings out of the way when not in use.

Hardware Required

2x M4x65 bolts

2x M4 nuts

4x M3x10 bolts

Instructions

Print two copies of each, the arm and the hinge plate. See assembly.3mf for suggested settings. It will print fine without supports, but I added some to make it a bit smoother.

Attach the arm to the hinge plate using the M4x65 bolt and an M4 nut.

Remove the top two M3x8 bolts on the front of each side panel. 

Mount the hinges on each side with two M3x10 bolts.

 

If you like what I'm doing…

 … consider buying me a coffee or joining my Printables Club.