1 / 1
Sway bar bushing spacer 14mm bar to 16mm bushing 2007 rx350
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to accomidate a smaller 14mm OEM sway bar. used with Moog K90547 bushing which was a bit to large.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- GNU General Public License v3.0
Spacer to accomidate a smaller 14mm OEM sway bar. used with Moog K90547 bushing which was a bit to large. Apparently Toyota lexus used several different sized bars. 14mm 16mm and others. The Moog K90547 is for a 16mm bar so it was too sloppy when use with 14mm bar on the 2007 RX350 rear.
This was a great solution. Prints in under an hour. I used PLA+ which seems to work. If it fails I will reprint with petg for the flex.
