1 / 2
Locking Treasure Chest with Key and Tray - Print-in-Place - No assembly required — zdjęcie 1
1 / 2

Locking Treasure Chest with Key and Tray - Print-in-Place - No assembly required

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A chest for all your treasures.

Ocena
4,333 / 5
Polubienia
35
Pobrania
426
Wydruki
3
Wyświetlenia
1780
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

New and Improved Locking Mechanism 

A print-in-place treasure chest/lock-box. 

No assembly is required, just print and go. 

I suggest printing at 0.30mm layer height rather than 0.20mm since 0.3 gives a nice grainy look to the box and provides a sizable reduction in print time. 

Should fit on a mini (the chest and key, may need to print the tray on its own)

PLA, PVB, and PETG all work with this print, though it was originally designed with PLA in mind. 

Tagi