Furry Digitigrade Dummy 13 assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is an assembly of many modifications that sum up to a cool Furry Dummy 13 mod
- Ocena
- 4,75 / 5
- Polubienia
- 385
- Pobrania
- 1773
- Wydruki
- 4
- Wyświetlenia
- 7697
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The remix is an assembly of all the furry parts found on the internet. I have created it to be a single-click print that the furry artists may send to their friends with printers.
I am not an author of the models, just this handy assembly file. All the authors are credited in the list of remixes.
Print Settings
Similar to the original Dummy 13 (https://www.printables.com/model/981111-dummy-13-version-10)
Recommended settings (100% scale, 0.4mm nozzle):
Material | Frame parts | ABS, ASA, or PETG |
Armor parts | Any | |
Layer height | First layer | 0.2 mm |
Other layers | 0.15 mm | |
Number of perimeters | 2 | |
Infill | 20%, rectilinear | |
First layer speed | 25% of default | |
Elephant foot compensation | 0.15 mm | |
Supports | None | |
Brim | As needed (depends on bed adhesion) | |
Perimeter generator | Arachne | |
Additional settings | ☑ Print external perimeters first OR ☑ Only one perimeter on first layer | |
Why no PLA?
PLA has three properties that make it a poor fit for the movable joints of Dummy 13's frame.
PLA is stiff, so it can take a lot of force to snap the joints together.
PLA is brittle, so the parts may break when subjected to that force.
PLA will creep under stress, so the joints will become loose over time.
I understand that you may only have PLA handy. You can give it a try if you want. But you will get much better results if you invest in some PETG.