Customized casing for RedRex power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customized casing for RedRex power supply
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to make a few adjustments for the Redrex power supply. In addition to minor corrections, like a deeper countersunk mounting hole for the M3 screws, I also customized the recess for this IEC socket. The Bram Elema cable duct also fits well and does not need to be shortened.
To mount it to the Drybox, you will need two M3x18 screws and to connect the power supply to the case, two M4x8 screws. The cover is attached to the casing by threaded inserts. If you only need M3 threaded inserts, I recommend this inexpensive option.
I recommend using organic supports; removing standard supports from the holes for the M3 screws is otherwise somewhat challenging.
The links to the dealer are affiliate – if you order something there, I get a small commission. The price for you will not change.