Qidi Q1 Pro Toolhead Cover V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a black toolhead cover for my Qidi Q1 Pro. This is the 2nd Version (upgrade from my fist one)
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 1321
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an upgraded version 2 of my Black Qidi Q1 Pro Toolhead cover with angry face.
The stock toolhead cover with fan weighs 74 grams
My toolhead cover with fan weighs 65 grams.
You will see in the pictures the front part of the face is 6mm thick. the original is 2 mm thick.
I have tested it on mine and it doesnt hit or touch anywhere.
Printer: Qidi Q1 Pro
Slicer: Orca Slicer
Filament: Iemai ASA-CF
Filament Profile: Qidi ASA
Nozzle: 0.4
Profile: 0.16 Optimal ( Toolhead Cover)
Nozzle Temp: 280 C
Bed Temp: 110 C
Chamber Temp: 55 C
Printed with tree supports and brim in the upright position, to get a better finish. (just worked better for me)
Speed: 100%
in the photos you will see the upgrades I made.
I used the stock Qidi fan. I drilled out the fan holes with a 5mm drill, just enough for the top of the m3 allan cap screw head to sit flush with the top of the fan.
Then I inserted the m3 brass inserts with a soldering iron.
Like before the face parts wash glued into the face recesses.
Link for airduct = https://www.printables.com/model/1149931-qidi-q1-pro-improved-visibility-duct-remix
Magnets 4x2 round magnets (also glued)
NB: I am not and engineer. !!!
NB: If you decide to do this its at your OWN RISK. Always plug out your printer before you do any alterations. Be Safe.