Applewatch stand (Series 10)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Applewatch stand for Series 10 and other with the same charger.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Wanted a watch stand to charge my apple watch series 10. Saw only older once online and thought, maybe just create a new one for my needs from the ground up.
Printed in PLA on the flat side, without supports; 0.2 mm layer height. Other materials will probably work fine. Also supports for the charger hole could be useful for a cleaner finish.
V1 Has a sharp corner at the bottom for cable routing that i forgot to correct before printing. Adds more strain on the cable.
V2 (not tested yet) removes that corner and the strain on the cable but might allow it to slip out more easily.