1 / 3
Four Elements 3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These files are designed for the most part for laser cutting.
- Ocena
- 5 / 5
- Polubienia
- 187
- Pobrania
- 481
- Wydruki
- 1
- Wyświetlenia
- 1450
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (266)Powiązane
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer.
To increase the size, you can cut these models into pieces, print them separately and then connect them with glue.
STL files are ready for printing on a 3D printer with a maximum print area size of 210x200. If your table size is larger, you can easily scale it to fit your size. To make a large-sized version of metal, wood or plastic, as in the picture, you will need the help of a laser cutter. To do this, I addeddfx andsvg files.
Wall mounting can be done using wall_mounting. It must be printed additionally and glued with glue to the main decor. Then fix it on the wall with nails or screws or use double-sided tape.
To achieve the wow effect, you need to place an LED strip on the back of the decor.
Category: 2D Art