Cover for X-Stage Poledancing Platform (Base and Pole)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two parts to protect the bearings of a X-Stage pole from debris.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
A very specific model for a rather small target audience ;)
My girlfriend has a portable “X-Stage” poledancing platform which can be disassembled completely. Inside the base is a large ball bearing to let the pole spin freely (it can be locked in place as well). To protect the bearing from dust and debris when disassembled AND the clothes from grease I modeled two cover parts.
They both print fine without support if oriented on the printbed correctly. I printed these parts with PTEG for better uv-light resistance because the stage is used outdoors frequently.
Note: These parts are designed for the 40 mm version of the x-stage pole. If you need them for the 45 mm version you have to enlarge the opening a bit.