Rotational Unit CW1 / CW1S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachment for the curing an washing station to carefully mix the resin while warming up.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 104
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a attachement to carefully mix the resin inside the bottle while warming up. It fits the latest Siraya Tech and Prusament bottles. Probably also everything thats sized inbetween.
I printed it with a 0.6 nozzle, 0.3 layer hight and 4 perimeters.
Bearings are 608 ones (d8 x D22 x t7). I opened the sealings and degreased them to give them a low rotational resistance. I used a M3x20 countersunk bolt for the arm and four M4x16 and one M4x14 countersunk bolts for the bearings. They just came out flush with the surface of the bearing. I just screwed everything directly into the plastic, you probably have to drill it out a bit.
Sorry for not refining my modells to the very end.
For the additional plattform (that one only works with the CW1S plattform) you can glue 1mm of NBR or comparable onto it to give it more friction.