Prusa Mk4 Bin Hook and/or Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bin can be hooked on loosely or more firmly mounted to the Prusa MK4/MK4s aluminum extrusion.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 79
- Wydruki
- 2
- Wyświetlenia
- 278
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is yet another Prusa MK4/MK4s bin to hold whatever you want (Tools, Waste Filament, Candy, etc…).
If you're going to attach the bin with screws you'll need 2xM4x10 screws and 2xM4 3030 T-Nuts.
I used a washer when mounting my setup, but you probably don't need it.
I've taken inspiration from multiple people so thanks to everyone for your hard work.
The main body is an exact copy of mbastas's PRUSA MK4/MK4S Bin (Z-Hugger).
I've added the hooks that hook onto the aluminum extrusion from Eisvogel's MK4 Bin (two hooks)
I've taken some inspiration from Spacekoaster's Prusa MK4 bin (screws remix) and added two screw holes. The big difference is that I've sized them down to fit M4 screws, and I've moved the holes into positions that make them easier to install.