1 / 2
Vernier caliper holder for tool board with 45 mm keyhole spacing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the 'Universal Caliper Mount' for tool boards with 45 mm keyhole spacing
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 262
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (11)Powiązane
This is a remix of the 'Universal Caliper Mount' for tool boards with 45 mm keyhole spacing.
Thanks to the provided *.f3d file from swiss_beluga it was easy to adapt the mount to fit my tool wall system.
Can be hung on a tool wall with 45mm keyhole spacing using 2 M4x10mm countersunk screws.
On the backside are two M4 threads, so the screws can be adjusted as desired, until it fits tight but is still easy removable.
Printing instructions:
- 0.4 nozzle
- 0.2mm Speed
- no supports needed
- 15% infill
Assembling:

- adjust the screws counterclockwise until the holder fits tight but can still be removed easily.