1 / 9
Flsun SR effector with HGX Lite V2 / LGX Lite and X1 Bambu Hotend or TZ V6 Hotend (Tests) — zdjęcie 1
1 / 9

Flsun SR effector with HGX Lite V2 / LGX Lite and X1 Bambu Hotend or TZ V6 Hotend (Tests)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lot of Test designs for Flsun Super racer with HGX Lite V2 Extruder And Bambu or TZ V6 hotend

Ocena
3 / 5
Polubienia
14
Pobrania
65
Wydruki
0
Wyświetlenia
730
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

All-in-one House/effectors for the FLSUN Superracer with HGX Lite V2 Extruder and X1C Bambu Hotend and TZ V6 Hotend

Update: Added Effector/house LGXLite/HGX Lite Combo with X1C Bambu Hotend

Also Houses for original effector. Need Effector Modifications!!

Adapters for ADXL345 Accelerometer

Use 2510 fan 24V (Not use original fan X1, it is 5V)

Compatible with CPAP and my fan 5015 adapter

https://www.printables.com/model/841496-cpap-duct-flsun-sr

 

Use Original EndBalls (Make sure to insert by pressing fully)

Use Brass Inserts M3 and M2.5

Batch of test designs. some unchecked!!

Print Setting:

0.2 Layer (0.14 for Duct)

20% Infill

3 wall 3 Top 3 Bottom

Supports Yes (on Build plate only)

Duct no need supports

Best ASA, ABS, Nylon, PC

Tagi