Xelsis milk carafe Chiller/Insulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Countertop chiller for the carafe so you can leave the milk out longer. Made to hold two gel freezer packs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A chiller to allow you to leave the carafe out for a while without the milk going bad. This is designed specifically for the Philips/Saeco Xelsis carafe (https://espresso-experts.com/products/xelsis-milk-carafe). So far I have been able to comfortably leave the carafe on the counter for 2-4 hours which covers my morning pretty well. The slot on the side is so you can keep track of how much milk is left. Printed in PLA. Will update the instructions if I find something better for use in the freezer.
- Print both parts (sorry, support is required for the body)
- Insert the gel packs and place the chiller in the freezer
- Take the chiller out of the freezer and place filled carafe in the chiller
In order to use it you will need to have two freezer gel packs (specifically these: https://www.amazon.com/dp/B01LXM8W8T )
Oh yeah, I oopsed and made the threads backwards. Everything works just fine but if you must have proper right hand threads you will need to mirror both parts. :/