Handle for Yeti 30oz Tumbler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handle for the handle-less
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adding a handle to the handle-less. I was envious of mom's Stanley. I wanted to make it easier to get my yeti cup which is handle-less. Fits my Yeti 30oz Ramble tumbler style mug
I found the original model, but it had a “built-in support” and there was a glitch in the STL, and portions could not be removed without some cutting and sanding. I digitally removed the support and remodeled a portion to get a file that is close to the original and could be sliced and supported as wanted.
I printed as the original intended at a 45-degree angle, with the flat side of the handle down.
- PLA
- Layers 0.2mm
- 4 walls, 25% infill
Pleas Like and Rate my model, thanks!
History:
Yeti_30ozHandle_r1: Initial release