1 / 2
Hobbywing XR10 20mm RC ESC fan guard — zdjęcie 1
1 / 2

Hobbywing XR10 20mm RC ESC fan guard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This piece goes over any of the 20mm fans used in the Hobbywing XR10 ESC, to protect and retain the blades.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
2
Wyświetlenia
104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This fan guard will fit over the 20mm X 20mm fan that comes with the Hobbywing XR10 Pro-Stock Spec ESCs, etc. (HobbyWing HWI30860500) It will require M2.5 X 12mm screws, but it will protect the blades from being hit and also from having the entire rotor fall out during a crash.

I suggest printing with PETG, upside-down on the build platform, so that no supports are needed. (There is a small perimeter ‘lip’ on one side) Enjoy!

Tagi