1 / 8
Stained glass soldering jig for waffle grid mat — zdjęcie 1
1 / 8

Stained glass soldering jig for waffle grid mat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jig for holding glass pieces at an angle, for soldering them together, using a waffle grid mat system.

Ocena
0 / 5
Polubienia
39
Pobrania
206
Wydruki
0
Wyświetlenia
1075
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Jigs for helping solder stained glass pieces at specific angles. Print two of each angle, then you lay your glass in them and solder!

These are made specifically to be used with the waffle grid mat systems, they have little pegs on the bottom that sit in the waffle grid to keep them in place.

There is also an adjustable support that you can print, that you can place underneath a piece of glass if the glass sticks out to the side too far to balance in the jigs. This part is experimental, your mileage may vary!

Tagi