Lego Display Container 100mmx100mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable Lego container that displays the Legos in the front w/ a closing lid. 100mm Wide x 100mm Long x 50/100mm High
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is a stackable Lego container that displays the Legos in the front with a closing lid. The dimensions of the container are 100mm Wide x 100mm Long x 50-100mm High.
The lid is only 5mm tall so its pretty compact. A full print uses 25m of filament and takes 8 hours to print, which is not bad for its size.
This is the larger sized box. You can stack two of the smaller on one of these boxes.
I found ABS does not work well with the body as the walls are thin so there will be a good chance of the print splitting. ABS works well for the top. PLA works but do not know how it will hold up long term with moving parts.
Quick video in motion.