1 / 3
Depth stop for skeleton keys/indoor home keys
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can be used to create a depth stop for old indoor keys to stop the key from overpenetrating the lock area.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model can be used to create a depth stop for old indoor keys to stop the key from overpenetrating the lock area.
Print with a filament of your choice.
Currently there is only the model KeyDepthStop_KeyWithFlatPortion, that can be used with a key, that has a rounded shaft up front, but a flat shaft in the back.
I am looking into creating another version of this model for completely round key shafts.
Necessary hardware
- 2* M3 16mm screws (for securing the two halfs)
- 2* M3 12mm screws (as set screws, to secure the depth stop in place)
- 4* M3 nuts
Use 3-4 outer walls for strength. Print with tree support.