Alko Jockey Wheel Thrust Bearing Weather Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A weather cover to fit my ALKO jockey wheel to prevent rain from entering and damaging the thrust bearing.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This has been designed to fit my ALKO 8" jockey wheel with a tube body diameter of 48.10mm and diameter of 30.20mm for the handle hub. I find that rain enters the top thrust bearing and makes it harder to raise and lower the trailer and was sick of using a bucket to protect it. I was planning on printing in TPU but made a test print in PLA and found it fit snugly so it will do. If/when it breaks I'll try a TPU or ABS version. I used a small cable tie on the handle shaft to prevent water running along the shaft and under the cover.