1 / 2
Hue Tap Dial mount for Elko Plus Frame — zdjęcie 1
1 / 2

Hue Tap Dial mount for Elko Plus Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount to integrate the hue tap dial in a Elko frame

Ocena
0 / 5
Polubienia
2
Pobrania
48
Wydruki
0
Wyświetlenia
286
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mount to integrate the hue tap dial in a Elko frame, uses a single slot. 
Needs 4x 18mm washers for the magnets in the dial to attach to, glued into pockets on the back. 

3mm screw hole for securing to wall. Might not be needed depending on wall flattness and how many switches are already in the frame, but helped in my 4x frame. 

 

Added a second version with ironing on edges, just for testing and a tiny bit better surface finish on the visible parts. 

Ironing the full surface is not adviseable due to the thickness where the washers sit but I have not tested this, might have to play with settings. 

Tagi