1 / 9
Prusa XL enclosure door seal — zdjęcie 1
1 / 9

Prusa XL enclosure door seal

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,62 € – 1,98 € netto (bez VAT)

Dla pliku: xl door seal_0.4n_0.2mm_FLEX,PETG_XLIS_1h35m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,80 € netto (środek widełek).

Masa podana przez autora
28 g
Czas druku podany przez autora
1,63 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A simple seal to tighten the slots on the side of the enclosure door

Ocena
4 / 5
Polubienia
26
Pobrania
125
Wydruki
3
Wyświetlenia
699
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I like to use low-level filtration while printing and want to prevent cooler ambient air from directly hitting the heated bed. I intended to close the two large slots directly in front of the door for this purpose.

The goal is not to make the enclosure airtight but simply to prevent the airflow from directly reaching the model. When printing with Nylon or ASA, this reduces the risk of warping.

The print is a mix of TPU and PETG, with the first three layers printed in TPU and the last seven layers in PETG. I used here a very soft TPU (A60) but it does not need to be that elastic.

The material consumption is only 25 grams, and it can be printed easily while lying flat. I mounted the seal from the outside, but it can also be attached from the inside.

I changed the 8 srews fom M4x8 to M4x10. Maybe it also works with to shorter screws.

Print settings:
0,2mm profile speed
PETG Prusament
TPU 60A Recreus

Tagi