1 / 4
Articulated Fidget Snakes - Ouroboros (no supports, print in place) — zdjęcie 1
1 / 4

Articulated Fidget Snakes - Ouroboros (no supports, print in place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fun fidget loop made of two snakes eating each other's tails. Coil them, ball them up, make different shapes!

Ocena
5 / 5
Polubienia
26
Pobrania
189
Wydruki
1
Wyświetlenia
1063
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prints in place, no supports needed. 

Parts are separated by around .4mm, so feel free to scale it up if you're concerned about tolerances (especially for silk PLAs which have a tendency to shrink when cooling). I've also included a single joint for test printing.

After printing, turn each joint gently until the inner parts break free. It will loosen up as you play with it. Enjoy!

Tagi