1 / 2
The Overheat Drum Belt Holder - A Secure way to carry drums and big mags! — zdjęcie 1
1 / 2

The Overheat Drum Belt Holder - A Secure way to carry drums and big mags!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Basically a magwell attached to a belt mount and uses an elastic band to hold heavy mags like drums securely.

Ocena
0 / 5
Polubienia
11
Pobrania
36
Wydruki
0
Wyświetlenia
423
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The Overheat Drum Belt Holder is a belt carrier for drum mags like the Overheat drum. It uses a catch and release similar to a magwell to ensure that the drum only comes out when wanted. It works with any talon-sized magazine with a through-cut catch hole(Sure.t is an example of one that doesn't work but remixes like this work.) and any belt smaller than 5mm x 40mm. The only supports required are in the spot for the catch.

Parts/Assembly:

  • 1x Elastic(rubber band, hairtie, etc.)
  • 2x 2x10mm pins(You might be able to get away with toothpicks)

Place the pins in one of the catch/release parts and press both parts together onto the slot on the main body. Make sure that the catch side is facing the belt mount. The catch and release should slide back and forth on the body smoothly. Finally, place your piece of elastic in the smaller channel and put it in the notch on the catch.

Let me know of any questions/problems and happy printing!

Tagi