15mm Rod Mount for Video Rig – Universal Support Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a mounting bracket for my video rig, so I quickly designed this one. Hopefully, it will be useful for others…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a mounting bracket for my video rig, so I quickly designed this one. Hopefully, it will be useful for others as well.
This bracket is designed for 15mm rods with a 60mm spacing and features a 1/4-inch thread, which is the standard small photography thread. It allows screws to be inserted from the top, bottom, and sides for flexible mounting options.
I printed it with five perimeter walls and 25% infill for extra strength.
Hardware Required: 2x M4 screws 2x M4 nuts
Text translated from German by AI, I built the model as a human being (AI labeling)
Category: Other